4
Tech Support 770-844-4200
www.productivity1000.com
Document Name
Edition/Revision
Date
P1-15TD2-DS
1st Edition
5/18/2018
Copyright 2018, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
Terminal Block Specifications
Part Number
P2-RTB
P2-RTB-1
Positions
18 Screw Terminals
18 Spring Clamp Terminals
Wire Range
30–16 AWG (0.051–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Max.
1/4 in (6–7 mm) Strip Length
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Max.
19/64 in (7–8 mm) Strip Length
Conductors
“USE COPPER CONDUCTORS, 75ºC” or equivalent.
Screw Driver
0.1 in (2.5 mm) Maximum*
Screw Size
M2
N/A
Screw Torque
2.5 lb·in (0.28 N·m)
N/A
WARNING:
To minimize the risk of potential safety problems, you should
follow all applicable local and national codes that regulate the installation
and operation of your equipment. These codes vary from area to area and
it is your responsibility to determine which codes should be followed, and
to verify that the equipment, installation, and operation are in compliance
with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from
the failure to follow all applicable codes and standards. We do not
guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for your
product design, installation, or operation.
If you have any questions concerning the installation or operation of
this equipment, or if you need additional information, please call Technical
Support at 770-844-4200.
This publication is based on information that was available at the time
it was printed. At AutomationDirect.com
®
we constantly strive to improve
our products and services, so we reserve the right to make changes to
the products and/or publications at any time without notice and without
any obligation. This publication may also discuss features that may not be
available in certain revisions of the product.
*Recommended Screw Driver TW-SD-MSL-1
General Specifications
Operating Temperature
0° to 60°C (32° to 140°F)
Storage Temperature
-20° to 70°C (-4° to 158°F)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side
Isolation
1800VAC applied for 1 second
Insulation Resistance
>10M
@ 500VDC
Heat Dissipation
2000mW
Enclosure Type
Open Equipment
Module Location
Any I/O position in a Productivity1000 System.
Field Wiring
Use
ZIP
Link Wiring System or removable terminal block
(sold separately). See “Wiring Options” on page 3.
EU Directive
See the “EU Directive” topic in the Productivity Suite Help
File. Information can also be obtained at:
www.productivity1000.com
Connector Type
(sold separately)
18-Position Removable Terminal Block
Weight
71g (2.5 oz)
Agency Approvals
UL61010-2-201 file E139594, Canada & USA
CE (EN61131-2 EMC and EN61010-2-201 Safety)*
*See CE Declaration of Conformance for details.
