Automationdirect.com Productivity 1000 P1-04DAL-2, Руководство пользователя

Страница: 1 / 8

1
Sales 800-633-0405 www.productivity1000.com
24V
V2+
V3+
V4+
0V
COM
COM
COM
COM
V1+
P1-04DAL-2
0-10VDC OUT
ANALOG
1000
P1-04DAL-2 Analog Output
The P1-04DAL-2 Low Resolution Voltage Analog
Output Module provides four outputs for converting
digital values from 0–4095 (12-bit) to 0–10 VDC
analog signals for use with the Productivity1000
system.
Output Specifications . . . . . . . . . . . . . . . . . . . . . . . 1
General Specifications . . . . . . . . . . . . . . . . . . . . . . 2
Removable Terminal Block Specifications. . . . . . . . 2
Wiring Diagram and Schematic . . . . . . . . . . . . . . . . 3
Module Installation Procedure . . . . . . . . . . . . . . . . . 4
QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wiring Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Module Configuration . . . . . . . . . . . . . . . . . . . . . . . 5
Linear Scaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Non-Linear Scaling . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warranty: Thirty-day money-back guarantee. Two-year limited
replacement (See www.productivity1000.com for details).
Terminal Block sold separately, (see wiring options on page 5).
Output Specifications
Output Channels
4
Module Signal Output Range
0–10 V
Signal Resolution
12-bit
Resolution Value of LSB
(least significant bit)
0–10 V = 2.44 mV / count
1 LSB = 1 count
Data Range
0–4095 counts
Output Type
Voltage sourcing at 10mA
Output Value in Fault Mode
0V
Load Impedance
≥ 1000 Ω
Maximum Capacitive Load
0.01 µF
Allowed Load Type
Grounded
Maximum Inaccuracy
0.5% of range
Full Scale Calibration Error
±0.2% of range
Offset Calibration Error
±0.2% of range
Accuracy vs. Temperature
±75 PPM / °C maximum full-scale
calibration change (±0.0025% of range / °C)
Max Crosstalk at DC, 50/60Hz
-72dB, 1 LSB
Linearity Error (End to End)
±4 LSB max., (±0.1% of full scale)
Monotonic with no missing codes
Output Stability and
Repeatability
±2% LSB after 10 min. warm up (typical)
Output Ripple
±0.2% of full scale
Output Settling Time
0.3 ms max., 5µs min. (full scale range)
All Channel Update Rate
2ms
Maximum Continuous Overload
Outputs current limited to 40mA typical
Continuous overloads on multiple outputs
can damage the module.
Type of Output Protection
0.1 µ Transient Suppressor
Output Signal at Power Up and
Power Down
0V
External Power Supply Required
24VDC (-20% / +25%), 100mA