Automation Technology C4-1280-GigE, Справочник по аппаратуре

Страница: 13 / 35

C4-1280-GigE Camera Hardware Reference Manual Rev. 1.4
•
9
Name Rev. Interface Access Description
ReverseY 1.0 IBoolean R/W When set to true, this parameter flips the image
vertically.
OffsetX 1.0 IInteger R/W X Offset of AOI
TestImageSelector 1.0 IEnumeration R/W Selection of the test image to be used.
- Off
- GreySensorColumnPattern
LinePitch 1.0 IInteger R Distance between consecutive lines in bytes.
PixelDynamicRangeMin 1.0 IInteger R Minimum pixel value sent by the camera.
PixelDynamicRangeMax 1.0 IInteger R Maximum pixel value sent by the camera.
Acquisition Control
Name Rev. Interface Access Description
AcquisitionStart 1.0 ICommand W Issues the START command. This starts the
acquisition.
AcquisitionStop 1.0 ICommand W Issues the STOP command. This stops the
acquisition.
AcquisitionMode 1.0 IEnumeration R/W Defines the type of acquisition:
- SingleFrame
- MultiFrame
- Continuous
AcquisitionAbort 1.0 ICommand W Issues the ABORT command. This immediately
aborts the acquisition without completing the current
frame.
AcquisitionFrameCount 1.0 IInteger R/W Number of frames to be acquired in MultiFrame
acquisition mode. The minimum allowable value is 1.
AcquisitionFrameRateAbs 1.2 IFloat R The frame rate of the imager. Absolute units are in
Hz.
AcquisitionStatusSelector 1.2 IEnumeration R/W Selector for AcquisitionStatus to read:
- AcquisitionTriggerWait
- AcquisitionActive
- AcquisitionTransfer
- FrameTriggerWait
AcquisitionStatus[AcquisitionStat
usSelector] 1.2 IBoolean R Status of the selected acquisition flag
Camera Controls – AOIs
Name Rev. Interface Access Description
MaxNumAOIs AT IInteger R Maximal Number of AOIs.
NumAOIs AT IInteger R/W Number of used AOIs.
ImageModeAoiSelector AT IInteger R/W Selects the AOI to show in image mode
AOISelector AT IInteger R/W Selects which AOI to control.
AOIHeight AT IInteger R/W Height of Aoi
AOIOffsetY AT IInteger R/W Aoi Offset X
AOIThreshold AT IInteger R/W Intensity threshold value for selected AOI.
Camera Controls – ModeAndAlgorithmControls
Name Rev. Interface Access Description
CameraMode AT IEnumeration R/W Selects the Camera mode or algorithm:
- Image
- CenterOfGravity
- Threshold
- MaximumIntensity
ProfilesPerFrame AT IInteger R/W This feature represents the number of Profiles per
Frame in 3D-Mode expelled by the camera.
AbsOffsetPos AT IBoolean R/W True: Absolute row position is returned. False:
Offset position with respect to the start row of AOI is
returned.
TrshFirstFalling AT IBoolean R/W Validates every Gaussian curve detected along an
image column.
NumCOGSP AT IInteger R/W Number of subpixel bits of COG output (0-6).
PosValidationEn AT IBoolean R/W Any invalid Gaussian 3D position value in all DC is
set to 0.