User Manual
13
©Automation Network Inc. 2016
ANC-120e
USB to DH+ Adapter
Firmware Upgrade
IMPORTANT: Only upgrade the firmware with the firmware image provided by Automation
Networks Inc. support staff and only when it is necessary to do so.
Make sure that the unit is disconnected from the DH+ network by unplugging the cable from the unit
before proceeding with the firmware upgrade.
1.
Open any web browser and enter the ANC-120e IP address in the address bar, default IP
address of the device is set to
“192.168.137.2”
2.
Enter the username and password in the corresponding fields, by default, the username is set
to
“admin”
and password is set to
“password”
3.
Click “OK” button
4.
If you entered the correct login credentials, you will be presented with the main configuration
window
5.
Navigate to the
“Upgrade Firmware”
tab
6.
Click on the
“Upgrade”
Button
7.
Wait approximately 5 seconds until the device reboots into firmware upgrade mode
