DL05 Micro PLC User Manual, 6th Edition, Rev. E
1-5
Chapter 1: Getting Started
Direct
SOFT universally supports the
Direct
LOGIC CPU families. This means you can use the
full version of
Direct
SOFT to program DL05, DL06, DL105, DL205, DL305, DL405 CPUs.
The
Direct
SOFT Programming Software User Manual discusses the programming language in
depth.
Direct
SOFT version 2.4 or later is needed to program the DL05.
Handheld Programmer
All DL05 Micro PLCs have built-in programming ports for use with the handheld programmer
(D2–HPP), the same programmer is used with the DL06 and DL205 families. The handheld
programmer can be used to create, modify and debug your application program. A separate
manual discusses the handheld programmer. The D2–HPP requires firmware version 1.09 or
later to program the DL05.
NOTE:
Not all program instructions are available to use with the HHP, such as the DRUM instruction. Use
Direct
SOFT for these instructions.
I/O Selection Quick Chart
The eight versions of the DL05 have Input/Output circuits which can interface to a wide
variety of field devices. In several instances a particular Input or Output circuit can interface
to either DC or AC voltages, or both sinking and sourcing circuit arrangements. Check this
chart carefully to find the best suited DL05 Micro PLC to interface with the field devices in
your application.
* See Chapter 2 Specifications for your particular DL05 version.
I/O Selection Chart
DL05 Part
Number
INPUTS
OUTPUTS
I/O type/
commons Sink/Source
Voltage
Ranges
I/O type/
commons Sink/Source
Voltage/ Current Ratings
D0–05AR
AC / 2
–
90 – 120 VAC
Relay / 2 Sink or Source
6 – 27VDC, 2A*
6 – 240 VAC, 2A *
D0–05DR
DC / 2
Sink or Source 12 – 24 VDC
Relay / 2 Sink or Source
6 – 27VDC, 2A*
6 – 240 VAC, 2A *
D0–05AD
AC / 2
–
90 – 120 VAC
DC / 1
Sink
6 – 27 VDC, 0.5A (Y0–Y2)
6 – 27 VDC, 1.0A (Y3–Y5)
D0–05DD
DC / 2
Sink or Source 12 – 24 VDC
DC / 1
Sink
6 – 27 VDC, 0.5A (Y0–Y2)
6 – 27 VDC, 1.0A (Y3–Y5)
D0–05AA
AC / 2
–
90 – 120 VAC
AC / 2
–
17 – 240 VAC, 47 – 63 Hz, 0.5A*
D0–05DA
DC / 2
Sink or Source 12 – 24 VDC
AC / 2
–
17 – 240 VAC, 47 – 63 Hz, 0.5A *
D0–05DR–D
DC / 2
Sink or Source
12 – 24 VDC
Relay / 2 Sink or Source
6 – 27 VDC, 2A
6 – 240 VAC, 2A *
D0–05DD–D
DC / 2
Sink or Source
12 – 24 VDC
DC / 1
Sink
6 – 27 VDC, 0.5A (Y0–Y2)
6 – 27 VDC, 1.0A (Y3–Y5)
