Coal-trol Digital™ - Model TS2 V3
Automation Correct LLC
5/2010 R0
www.automationcorrect.com
Page 13
Instruction Manual
IF IGNITER INSTALLED and (IGN = M)
Extended Menu Operations
DISPLAY
ACTION
NOTE
Use FEED when manually
kindling a fire to help fill and
even-out the grate.
Press and hold MENU
button for 5 seconds.
The display counts down
from 10, once a minute until
complete.
FEED 10
9,8...1
W h e n c o m p l e t e , t h e
thermostat will revert to the
Round-robin display.
FEED
UP or DOWN
button
TEST
MENU button
STOKER
CMBSTN
CNVCTN
IGNITR
AUX
IC 000
UP or DOWN
button
In turn, each control item is
turned on for 5 seconds until
MENU button is pressed.
This can be a good way to
determine if the controls are
connected correctly and to
d e t e r m i n e i f t h e y a r e
working.
Stoker Motor
Combustion Fan
Convection Blower
Igniter
Auxiliary Fan
Ignition Counter
MENU button
IGNITE
MENU button
Brnout
MENU button
MENU
button
IG1 20
UP or DOWN
button
MENU button
Bo1 35
UP or DOWN
button
MENU button
The IGNITE sequence will operate
the stove to start the fire. If
necessary, the fuel is primed onto
the grate before igniting. Before
starting the stove make sure draft
controls are operating.
The Burnout (BRNOUT) sequence
will stop the fuel feed and after a
time, the combustion blower. It will
then prime fresh fuel onto the grate
and will turn off all the stove
motors, except the Convection fan,
if it is being manually operated.
Mechanical vent motors will only be
turned off if they are controlled by
the Coal-Trol.
MENU button
NOTE
Repeat at STOKER
W h e n
fi n i s h e d ,
"NOFIRE" is added to
the Round-robin display.
