![Automatic Technology SecuraLift GDO-7V1 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/automatic-technology/securalift-gdo-7v1/securalift-gdo-7v1_owners-installation-instructions-manual_3021679007.webp)
Owner Installation Instructions
GDO-7V1 SecuraLift®
7
Over load indicator
When the maximum opening and closing capacity of the opener is exceeded the red and
green Limits LEDs flash alternately to indicate that an overload has occurred.
Auto courtesy light
The courtesy light on the opener comes on automatically whenever the door is
activated. The light can also be switched on and off without operating the door.
This is done by pressing the button on any hand held or wall mounted transmitter
which has been stored with the light code.The light will stay on for approximately
three minutes then switch off. This time is also adjustable.
Anti vibration brackets
opener has inbuilt antivibration brackets hang the opener by using anti vibration
brackets where noise is the problem.
Vacation mode
A hand held transmitter can be programmed to lock and unlock all other
transmitters that have been programmed into the openers’ memory. The vacation
mode can be used when the door is left idle for long periods of time.
Pet (pedestrian) mode
The hand held transmitter can be programmed to open the door partially so that the
family pet can enter and exit the garage at any time. You may also wish to open the
door to a height suitable only for pedestrian access. The door opening position is also
programmable.
Auto close mode
The opener can be programmed to automatically close after an open cycle. The auto close time
is adjustable. It is compulsory to install a Photo Electric Beam if this mode is selected, otherwise the
door may cause personal injury or damage to property.
Photo electric beam (optional)
The opener has an input for a photo electric beam to be connected for extra safety protection and use of the
auto close mode.
Manual operation
The opener is equipped with a unique manual disengaging device. If the power to the opener is disrupted for
any reason the door can be put into manual mode by pulling down on the string handle on an angle towards
the door. This will allow you to manually open or close the door. To re-engage the opener pull the string
handle away from the door.
Features