Installation Instructions
GDO-12V1 Hiro
™
17
8. Maintenance
8.1 Door Maintenance
A poorly maintained door could cause fatal / serious injuries or
damage to property.
•
Frequently examine the door, particularly the cables, springs
and mountings for signs of wear, damage or imbalance.
DO NOT USE
if repair or adjustment is needed since a fault
in the installation or an incorrectly balanced door may cause
injury.
•
Fasterners: Check all screws, nuts and bolts to ensure they are
secure.
•
Spring Tension: It is natural for springs to lose tension. Should
the door become hard to operate or completely inoperative,
contact a door professional.
•
Guide Tracks: Clean the internal sections of the guide tracks
every 3 - 6 months with a cloth dampened with mineral turps
or methylated spirits.
8.2 Service Counter
The opener has an inbuilt service counter which indicates the unit
has completed 3000 drive cycles.
By Holding the RED STOP / SET Button when the SPANNER LED
is illuminated and the main light flashes five (5) times will reset the
counter.
DO NOT DO IT YOURSELF:
WARNING!
Failure to maintain your garage
door may void the warranty on your garage
door opener.
DIY
Door adjustments should only be carried
out by experienced persons, as this function
can be dangerous if not performed under
strict safety procedures.
Run the Safety Testing procedures
MONTHLY in Section 6.5 to ensure
garage door is fit for use.
tip
