manualshive.com logo in svg

Automatic Technology Axess Pro Series 1101, Руководство по установке

Поделиться
Скачать
Automatic Technology Axess Pro Series 1101 Скачать руководство пользователя страница 22

22

Axess® Pro Series 1101 

Owner Installation Instructions

Activity report ID

This parameter sets the ID of the controller that 
is sent with the activity report. Contact Automatic 
Technology for more details.

Vacation mode 

Vacation mode can be turned on or off using this 
parameter.

Password protection 

The password feature enables all parameters and 
confi guration settings to be protected unless a 
password is entered. When this feature is turned 
on the user is requested to enter the desired 
password to be used. The password protection 
feature has a time-out that expires after 60 
seconds of inactivity. Alternatively the user may 
log out manually by pressing exit when the main 
screen is displayed. 

Transmitter grouping

The transmitter store number display format can be 
changed to show a grouped format. When grouping 
is selected, instead of displaying the store location as 
a number between 1 and 511, it is displayed as ##$ 
where ## is the group number and $ is a character 
a,b,c,d,e,f,g or h which indicates the group member.

Open input polarity 

The OPN input is normally confi gured for N/O 
operation. This parameter allows its operation to be 
changed to N/C. 

Stop input polarity 

The STP input is normally confi gured for N/O 
operation. This parameter allows its operation to be 
changed to N/C.

Open input as second PE BEAM input

The open input can be confi gured to use as a second 
normally open PE beam input.

Parameter

Min

Max

Default

Step

Unit

Menu No.

P.E INPUT RESPONSE MODE Sets the P.E 
response mode.  Options are OPEN and CLOSE 
cycles stop, Close cycles stop or Close cycle 
reverse

CLS to 
reverse

7.1

PED INPUT = SWIPE MODE Selects PED input 
functions as pedestrian access swipe input

Off On

Off

7.2

REMOTE CODE ENABLED 
Selects remote transmitter coding function

Off On

Off

7.3

ACTIVITY REPORTS Select report to be output

Off 

255

Off

1

7.4

ACTIVITY REPORT ID 
Selects ID for controller, sent with activity report

0

65535

0

1

7.5

VACATION MODE 
Selects vacation mode - disables remote control

Off On

Off

7.6

PASSWORD 
Selects password protection for all changes

Off On

Off

7.7

TX # GROUPING 
Selects tx’er number group display format

Off On

Off

7.8

OPN INPUT N/C OPERATION 
Selects operating polarity of OPN input

Off On

Off

7.9

STP INPUT N/C OPERATION 
Selects operating polarity of STP input

Off

On

Off

7.10

OPN INPUT 2nd P.E  OPERATION 
Selects OPN input as 2nd P.E input

Off

On

Off

7.11

Содержание Axess Pro Series 1101









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды