Automate AM7 Скачать руководство пользователя страница 9

Страница: 9 / 58

If optional starter kill relay or its connections are immediately visible upon removal of the under-dash panel,

they can easily be bypassed. Always make the relay and its connections difficult to discern from the factory

wiring! Exposed yellow butt connectors do not look like factory parts, and will not fool anyone! For this reason,

routing the optional starter kill wires away from the steering column is recommended.

The relay satellite wiring carries large amounts of current. The wires should not be extended and should be cut

to the minimum length necessary. Since the relay satellite is functioning as the ignition switch in the vehicle,

it is often convenient to mount the relay satellite close to the main ignition switch harness.

ffiinnddiinngg tthhee wwiirreess yyoouu nneeeedd

Now that you have decided where each component will be located, you’re going to find the wires in the car that

the security system will be connected to.

IIM

RTTA

NTT!! Do not use a 12V test light or logic probe (computer safe test light) to find these

wires! Use a digital multimeter for all testing.

We recommend two possible sources for 12V constant: the (+) terminal of the battery, or the constant supply to

the ignition switch. Always install a fuse within 12 inches of this connection. If the fuse also will be powering

other circuits, such as door locks, a power window module, a Nite-Lite® headlight control system, etc., fuse

accordingly.

IIM

RTTA

NTT!! Do not remove the fuse holder on the red wire. It ensures that the control module

has its own fuse, of the proper value, regardless of how many accessories are added to the main
power feed.

oobbttaaiinniinngg ccoonnssttaanntt 1122VV

llooccaattiioonnss ffoorr tthhee rreellaayy ssaatteelllliittee

llooccaattiioonnss ffoorr tthhee ooppttiioonnaall ssttaarrtteerr kkiillll rreellaayy

Содержание AM7



























































Результаты поиска

Содержание AM7

Отзывы:

Бренды по названию

Популярные бренды

Automate AM7, Руководство по установке

Результаты поиска

Содержание AM7

Отзывы:

Бренды по названию

Популярные бренды