WIRING DIAGRAMS
figure 2
Bend the actuator rod as illustratedto the left.
CORRECT BENDS
Carefully pry interior panel off of the door with a flathead screwdriver.
Actuator rod
Factory rod
Set screws
figure 1
figure 3
INCORRECT BENDS
Страница 1: ...r lock plunger 8 Attach the rod adapter to the actuators rod and tighten the screw Figure 3 9 Connect the rod adapter to the factory door lock rod and secure by tightening the screw Figure 3 10 Run th...
Страница 2: ...REEN GREEN BLUE BLUE BLACK RED ACTUATOR ACTUATOR ACTUATOR ACTUATOR OPTIONAL Refer to alarm or keyless installation instructions TRUNK SHAVED DOOR HANDLE TRIGGER USER GUIDE AND INSTALLATION MANUAL NOTE...
Страница 3: ...figure 2 Bend the actuator rod as illustrated to the left CORRECT BENDS Carefully pry interior panel off of the door with a flathead screwdriver Actuator rod Factory rod Set screws figure 1 figure 3...
Страница 4: ...k system This sensor switch will unlock your doors when the ignition is switched to the OFF position and automatically lock the doors when the ignition is in the ON position This feature is most ideal...
