11
iMIG200DP
OPERATION
If you would like to stick weld using this
machine, you will need to set up the
machine as pictured on the right.
The electrode holder must be in the
positive terminal and the earth clamp in
the negative in order for this to work.
When welding with aluminum or aluminum alloy, you
will need to use Al-Si or Al-Mg.
When welding with stainless or carbon steel you will
need Fe, Crni.
When using these wire types, different liners will be
needed;
For aluminum, a plastic liner will be needed to feed the
wire through the feeder directly, as shown in the image
to the right.
For stainless, you will need to use a metal liner with a
spring tube.
The torch must be in the positive
terminal and the clamp in the negative
as shown on the left in order to do this
type of welding.
