Autojack IG1200i, Инструкция по безопасности и эксплуатации

Страница: 16 / 60

IG950i/IG1200i/IG2000i 14
Operation
6. If this i s the first time you are using the
generator or if the generator had run out of fuel
the last ti me you used it, pump the primer bulb a
minimum of 6 times to introduce fuel into the
carbu
retor.
7. Hold the generator handle firmly and pull the
starting handle lightly until you start to feel
resistance and then pull up sharply to start the
engine.
NOTE: you may have to do this more than once.
WARNING: Once the generator has started,
release the handle slowly to avoid
injury/damage as it whips back.
NOTE: When you first start the generator, the
overload indicator may light up for a few
seconds, this is normal. If the overload indicator
is still lit after 5 seconds, stop the engine and
contact your AUTOJACK dealer.
8. Once the engine has warmed up, move the
choke lever to the left, to the “run” position.
Economy switch:
ON:
Recommended to minimi
s
e fuel
consumption and further reduce noise levels
when no load is applied to the generator. Engine
speed varies with the load.
OFF:
The smart throttle system does not operate.
CAUTION: The economy control does not work
effectively if the electrical appliance requires
‘BURSTS’ of power.
CAUTION: Turn the economy control feature off
when connecting high load appliances or when
connecting to the DC output.
Connecting electrical devices
The generator can supply both 230V AC and 12V
DC
AC power
1.Start the engine.
2.Make sure the appliance is turned off before
connecting it to the generator.
3.Connect the appliance (max load 800W) to the
generator.