AutoGyro MTOsport, Руководство по обслуживанию

Страница: 175 / 191

Manufacturer
Maintenance Manual
AutoGyro
MTOsport
MMM-CV-E_16-06-13 Part E - 63-11-30 6-1 Page 1 of 1
63-11-30 6-1 INSPECTION: PRE-ROTATOR UPPER ENGAGEMENT LNE
GENERAL, REFERENCES AND REQUIREMENTS
Task may only be performed by an organization or individual trained and entitled to do 'Line Maintenance'!
Secure gyroplane against unauthorized or unintended operation!
Gyroplane must be placed on level ground and restrained (blocks, chocks)
SPECIAL TOOLS AND CONSUMABLE MATERIALS
AG-GRS-01 Lagermeister WHS 2002 Grease (88-00-00-S-30477)
PRECAUTIONS AND SAFETY MEASURES
PROCEDURES
1 Inspect wear pattern and gear mesh of pre-rotator upper engagement. If in doubt, contact AutoGyro
customer support.
2 If the wear pattern is uneven (see Fig. 1), e.g. due to dynamic skew, the pre-rotoator upper engagement /
Bendix shaft must be repaired acc. to
63-11-30 8-2 .
IMPORTANT NOTE: adjustment job is classified as heavy maintenance (HVY)!
3 Inspect backlash of pre-rotator upper engagement. Backlash should be as tight as possible, but also wide
enough to allow easy engagement of the pinion into the sprocket in any position.
4 If necessary, have backlash adjusted 62-31-00 5-1 .
IMPORTANT NOTE: adjustment job is classified as heavy maintenance (HVY)!
5 Grease with AG-GRS-01.
ILLUSTRATIONS
Fig. 1 - Wear Pattern (uneven)