MultiGrow Installation Guide
V2.0 MultiGrow Installation Guide Copyright© 2018 Autogrow Systems Ltd
6
Bus Terminators
It is important that each of the Bus Networks has a
terminator at each end of the Bus Network daisy-chain. The
terminator is a method of placing a start and end to the Bus
Network. Every module has a terminator switch built-in. All
these switches must be left
off
except the switches at each
end of the daisy-chain where they shall be in the
on
position.
Note:
If a switch is left closed in the middle of the bus it will seriously degrade the communications which may
then work intermittently or not at all.
