Ver 6.0 IntelliClimate Installation Guide (21 August 2020)
Copyright©2020 Autogrow Systems Ltd
12
Advanced settings and rules
These settings and rules are pre-set to typical values suiting the majority of growrooms.
However, expert users may wish to alter them to achieve optimal performance.
Switching offsets
This group of advanced settings refers to the exact point at which a device is switched on
or off. The idea is to have a small differential between the ON point and OFF point to avoid
device switching on/off too rapidly as this could cause unnecessary wear. The switching
offsets are also useful to avoid overshoots when a heater or CO
2
is switched off.
The IntelliClimate has standard offsets as a default, but after observing your growroom,
you can alter these offsets to achieve your perfect environment conditions.
*On IntelliGrow
Rules
Each rule is listed below with a brief description and a suggested initial value.
Humidify/temperature control rules
When changing from night to day, prevent heater from switching on for XX minutes prior
to lights turning on to prevent exceeding your temperature set point.
*On IntelliGrow
Set the heating offset to ensure the fans and heaters do not run simultaneously. This is
especially useful in colder environments where outside air could cool the room down very
quickly.
*On IntelliGrow
