Energizing and Trial Run
1. Before use, check the power supply voltage, frequency and the other data carefully and make sure they
are in line with the requirements, and check if the ground wire is in good condition and the electrical wiring
is correct.
2. A special key is provide along with the shipment of the door opener. Turn the key counterclockwise (to
disengage the clutch), push the sliding door and let the door opener to operate without load. If the door
opener works properly, then turn the key clockwise (to engage the clutch).
3. Turn on the power, start the door opener, and observe the sliding operation of the sliding door.
4. Adjust the magnet’s position until the door is able to open and close in positions to your satisfaction.
Care and Maintenance
1. Apply some anti-rust grease to the end of the worm gear spindle located inside the hole of the special
key.
2. Check frequently if the electrical grounding is in good condition.
3. Check frequently if all parts and components are in good condition.
4. The device uses advanced lubricant that requires no replacement or replenishment.
