Before using
Always connect the power
• Before connecting the power, please read the information within this manual.
• Power cable must only be plugged into the indicated area. If the cable is connected
incorrectly, back voltage occurs which may damage to your product.
• Connect the wiring to the fuse box within the vehicle for installation.
• In high-temperature environments, this product automatically stops recording to prevent malfunction
• When recording automatically stops, The front-facing blue LED with flash repeatedly.
When temperature falls to safe levels, The device will automatically resume.
• If you do not want the power connected, connect yellow wire(BATT+) to red wire(ACC+).
Undervoltage lockout
• Undervoltage lockout helps to prevent battery drain. If you want to adjust setup,
19
you can access the PC viewer and change the setup.
Black box power cable
Connect the power supply to black box terminal
Yellow wire(BATT+): Fuse box in the vehicle
should always be powered.
•
Fuse connection (emergency lights, interior lights,
taillights, etc)
Red wire(ACC+): Fuse box in the vehicle when
the vehicle starts-up.
•
Connect the fuse when power is on (cigar lighter,
audio, etc)
Black wire(GND): Bolt onto metal parts of the
body
B
e
fo
re
u
si
n
g
