Collision detection
sensitivity is set to
OFF. This sensor is an in-built system that will automatically save the
video clip in a
protected manner where an impact or knock occurs. These clips need to be manually deleted,
and if too many protected files are saved the dash camera can stop recording with or without warning. This is
particularly important in trucks and heavy vehicles where vibration in the cabin is much greater than in a
smaller vehicle.
Watching the video on your computer
To watch your video on your PC we recommend VLC media player, as this player has the latest codecs installed.
Note:
Only Windows computers will run the mapping software not MAC. MAC computers can still play the video
from your
dash camera perfectly and it will show the video on the screen.
Your computer needs to meet the specifications noted on our website, if not it can result in jerky vision. If your
video is jerky or not smooth flowing when playing from the micro SD card out of the R22 camera, or from the
USB reader, then first transfer the video from the micro SD card to your computer via copy and paste. Then play
the video directly from your hard drive.
You do not need to delete
all the files on your micro SD memory card after viewing. Only delete
the video files
that have been saved in a protected
manner (if collision detection is on) that you no longer wish to keep. The
dash camera overwrites the other unprotected video files, so there is no need to delete them.
WARNINGS:
Do not attempt to modify or open this dash camera or power lead in any way. If you need to
hardwire the
camera you can do so but it must still run through the supplied power lead/adaptor (as the camera is only 5
volts/1Amp) and be on the same circuit as the ‘accessories’ so that it goes on and off with the vehicle ignition
and does not stay powered 24/7. The R22 runs on 5 volts/1 Amp only and voltage above this will destroy the
dash camera. If the dash camera or power lead has been tampered with or modified in any way the
OnSiteCameras warranty will be considered null and void.
The R22 camera is designed to be used in an enclosed vehicle cabin only. If it is exposed to moisture, rain or
excessive dust damage, OnSiteCameras will not be liable to replace or repair the device.
Warranty is not transferable.
Copyright © 2017 OnSiteCameras – All Rights Reserved.
Flicker
50Hz
Set clock
Pre-set by Onsite Cameras to AEST
Language
English
