manualshive.com logo in svg

AutoAqua SAWC-400P, Руководство пользователя

Поделиться
Скачать
AutoAqua SAWC-400P Скачать руководство пользователя страница 15

Power Outage Security Measures 

Change for Simple

14

1. When the power outage occurs during the water change process, 

     the process will be delayed for 1 minute after restoration of power 

    and then resumes. The pump icon will  ash during the delay.

2. When the power outage occurs during the countdown, the timer 

    will pause during power outage.* It will retain the record and 

    resume after power outage automatically.

Specifications 

1. Power Input : 100-240 VAC 50-60 Hz
2. DC Pump :
      • Head : 8.2 feet (250 cm)
      • Flow Rate : 74 gph (280 lph)
3. Max. Mounting Thickness : 1/2 inch (12.7 mm)
4. Water Change Interval : 
      • Minimum : 1 hour
      • Maximum : 99 days

Notice 

1. Please read the manual in detail before installation.
2. If using another ATO instead of the built-in ATO, please turn off 
     your ATO before AWC starts.
3. Avoid setting up the sensors in an area with micro bubbles and 
     direct light.
4. Please keep the controller away from water and make sure the 
     pump connections are dry before plugging in.

* Since the timer is not running during a power outage, the next 
   water change process will be delayed.
   For example, a power outage occurs when the display shows 00:08. 
   After Smart AWC Duo is powered on again, the countdown will
   start from 00:08.

Содержание SAWC-400P

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды