24
Example set up is for a windlass plus auxiliary equipment such as a cleat, using a single
AA702 base station.
Select Modes in the Set Up Menu
Select the AA702 ID (eg 803D)
The screen will show the Modes menu.
Windlass
Follow the steps in example 1 above for the windlass settings.
Return to the Modes screen. .
Auxiliary Equipment
Scroll to Auxiliary outputs .
Select Auxiliary outputs. The screen displays the Auxiliary Outputs
available. In this example there are 2 auxiliary outputs.
Both ouputs are currently disabled.
Select the Auxiliary Output to set up. eg Output 3. The screen
shows the key logic options. At present the Output is disabled.
Scroll to the Key Logic required for the auxiliary equipment:
Momentary
(Hold the button down for activity)
Toggle
(Press and release the button to turn on the
equipment and press and release again to turn off).
Select the Key Logic
Scroll to Next and then select Next.
The screen shows the operating keys. Press the console key you
wish to use to operate the auxiliary output. In this example the left
arrow key will operate Output 3.
Press the mode button to select this key and return to the Auxiliary
output screen. Output 3 is now listed as Aux C.
Scroll to and select the next Auxiliary output and repeat the
instructions above to select the Key logic and the operating key
for the next Auxiliary output.
Press 4 times to return to the operating screen.
803D
EXAMPLE 5 - AUXILIARY EQUIPMENT
Auxiliary Key References
Aux A
Aux B
Auc C
Aux D
