AutoAnchor 560, Руководство пользователя

Страница: 24 / 41

4.4 AUTOMATIC AND MANUAL OPERATION
Keep your finger on the button to deploy the anchor manually or use the automatic function
for hands free anchor deployment and retrieval. See the instructions for both options below.
4..4.1 MANUAL OPERATION
Deploy and Retrieve the Anchor Using Manual Operation.
Turn the AutoAnchor on.
Clear the safety lock.
Hold down the up or down button to deploy or retrieve the anchor. Releasing the
button stops the windlass operation.
Ensure the anchor is fully docked and secured before moving the boat.
DOCKING ALARM:
During retrieval the windlass will stop and the
AutoAnchor beeps to warn the operator the anchor is at the preset
docking distance. Press and hold the button to continue retrieval.
Extra care must be taken at this stage of retrieval.
Use the Automatic Function to:
•
Preset the length of rode for deployment.
•
Have hands-free operation of the windlass.
•
Retrieve the anchor automatically to the preset docking distance.
Note: For rope/chain counting, if the sensor or load sensing wires are
not installed correctly the automatic function
will not operate
. An
Installation warning message will display on the screen. The windlass
can still be operated using manual operation but on retrieval the display
may be incorrect because it cannot allow for the stretch in the rope.
4.4.2 AUTOMATIC OPERATION
WARNING
:
There is an inherent risk when using any automatic function
on a boat. If you choose to use the AutoAnchor automatic functions, you
must still control and supervise all windlass and anchoring operation.
For an accurate reading always ensure the AutoAnchor display reads 0.0 before
deploying the anchor.