Autoadapt Turny Low Vehicle, Руководство по установке

Страница: 27 / 80

Install all console legs in OEM seat attachment in the floor. Use a
spacer to compensate for mat thickness.
Fit the brackets to the application tool again and put it back into
the intended position in the vehicle.
Mark where the hole for each bracket leg will be drilled into the
brackets. Next, remove the brackets from the application tool and
drill. Use 9 mm drill.
Install the bracket in the vehicle
1
Mark out where holes for all
bracket legs will be drilled
into the bracket.
2
Use a spacer to compen-
sate for mat thickness.
1
2
Spacers between 5-45 mm height are available to
buy as accessories. Contact Autoadapt Support for
further help.
Horizontal spirit level
On
On
O
n t
op
Inclined floor 4°
27
Getting seated Turny Low Vehicle
EN
In
st
al
la
ti
on