Autoadapt Carony Drive, Руководство по обслуживанию

Страница: 66 / 89

66
3:1 Description and programming
33
CHARGING The charge socket is underneath the control unit. The Carony Go
will be charged both if the unit is on or off.
ALWAYS CHARGE THE CARONY GO WHEN NOT USING IT!
Power module DK-PMB-21 (boost + 2 seats + lights)
The power module has a capacity of 60 amp.
For the Carony Go only 35 amps is used to save power.
There is a boost function that gives extra 15 amps for maximum 10 s. when needed.
Electrical specifi cations:
Minimal Nominal Max Units
Carony Go operating voltage 18 24 27 V
Carony Go Current 0 0-35 35 A
Boost Current 0 0-15 15 A
Boost Current time 0 0-10 10 s
Idle Current - 120 - mA
Seat Current 0 6 12 A
Light feeding - 24 - V
Drive motor 0 0-230 230 W
Drive motor cont. current - 8 - A
Drive motor resistance - 250mOhm - Ohm
Short Circuit Current Control* 8 - 15 mA
* Because there is only one main fuse (50 A) the Carony Go is equipped
with a short circuit control system that inhibit current fl ow through circuits if
short circuited.
Charging
• When chargeing, charge will continue also if the control is turned OFF
• Use the Battery Charger indication to show if the battery is fully charged or not,
even if the control panel should indicate otherwise.