Auto-Trail Excel, Руководство пользователя

Страница: 32 / 66

Water Services
Please note that if the pump runs on for
more than 5-10 seconds after you have
closed all the taps, it is possible that
there could be a leak in the system.
This should be checked immediately.
Filling The Fresh Water Tank
The tank is filled via a lockable water inlet on
the outside of your vehicle.
This inlet is identified by a blue tap symbol
adjacent to it (either a blue label or a blue
moulding on the filler itself).
The location of the water inlet will vary from vehicle
to vehicle so please familiarise yourself with its
location before using your vehicle for the first time.
Before attempting to fill your fresh water tank
please ensure that the cold water drain tap inside
the vehicle is in the closed position (see ‘draining
the water system’ section).
To Fill
• Remove the cap and insert a suitable length
of pipe.
• Connect the other end to a clean water supply.
• Fill the tank until either the water level gauge
reads 100%, or until the tank begins
to overflow.
• Remove the hose. Replace the cap, lock and
remove the key.
Please note, use only food or drug
quality pipe.
Waste Water Tank
All waste water (excluding the toilet) is piped into
an onboard waste water tank located underneath
your vehicle. The volume of the waste water tank
will vary depending on which model you
have chosen.
When the waste tank becomes full (which will be
indicated by a visible and audible signal on the
control panel), the tank should be emptied via the
drain valve on the outside of the vehicle over a
suitable drainage point.
When the ‘tank full’ indicator sounds there will still
be some capacity in the waste tank, but we would
advise that it is emptied as soon as possible.
31 www.auto-trail.co.uk
: OWNERS HANDBOOK
4188 AT Excel handbook 2011:Layout 1 23/11/10 14:26 Page 31