Auto Test BST-380, Руководство пользователя

Страница: 9 / 28

When a surface charge is detected by the tester, it prompts “SURFACE CHARGE
DETECTED, TURN LIGHTS ON”.
Turn lights on as prompted to eliminate the battery surface charge, the tester will then
display the following messages in a sequence:
Now that the detection of the surface charge has been eliminated, turn lights off as
prompted, then press the OK key. The tester will recover automatically.
2) OUT-OF-VEHICLE means the battery is not connected with any of the vehicle loaded,
i.e. battery connection is cut off.
3.3.2 Select Battery Charge State
After selecting the battery location, the tester will prompt to select the battery charge
status, i.e. Before Charge or After Charge.
Press the UP/DOWN key to the select battery charge status, then press the OK key to
confirm. This process ensures a more accurate test result.
NOTE: Select Before Charge for Cold Vehicle and After Charge for Hot
Vehicle.
SURFACE CHARGE
DETECTED
TURN LIGHTS ON
HEADLIGHTS ON
TURN LIGHTS OFF
SELECT TEST
OUT-OF-VEHICLE
SELECT CHARGE
BEFORE CHARGING
SELECT CHARGE
AFTER CHARGING