Auto
Monitor
User Manual Version 7.22
Page 18 of 70
Table 3 lists the type of event notifications displayed by the AutoMonitor.
Event
Description
Screen Message
Invalid Card
Indicates that an invalid, unformatted or
unreadable, or an expired card is inserted
"Non-valid card"
Card Conflict
This event is raised when cards in the two slots
of the tachograph conflict with the operating
modes of the tachograph. Table 5 lists the
scenarios when card conflict event is raised.
"Card conflict"
Time-overlap
This event is raised when the date/time of last
withdrawal of a driver card is later than the
current date/time of the tachograph equipment.
"Time overlap"
Driving without
appropriate card
This event is raised when vehicle is moved while
one of the conditions listed in Table 6 is met.
"Driv'g w/o approp. card"
Card inserted
while driving
This event is raised when a tachograph card is
inserted while the vehicle is in motion.
"Card insert. while driving"
Unsaved last
session
This event is raised when a driver card or a
workshop card is inserted, whose last session
was not properly closed/saved.
“C/session not closed”
Over-speeding
This event is raised when the vehicle speed
reached above the maximum speed set for the
tachograph.
"Over speeding"
Motion sensor
data error
This event is raised when the tachograph finds
errors in the data obtained from the motion
sensor.
"Sensor fault"
Rollover Event
This event is raised when vehicle’s rolling force
is approaching closer to the rollover. The event
is recorded when the rollover detector issues a
warning or a danger alert.
"Rollover Event"
Company lock
This event is raised when the tachograph is
locked or unlocked by a company.
"Company lock event"
"Company unlock event"
Rollover sensor
fault
This event is raised when communication with
the rollover sensor is dropped.
"Roll-Sensor Err"
Table 3: Events notification and description
A purpose code is recorded with the properties of an event. The description of each purpose code
is listed in Table 4.
Purpose Code
Description
0x00
One of the 10 most recent (or last) events/faults
0x01
The longest event for one of the last 10 days of occurrence
0x02
One of the 5 longest events over the last 365 days
0x03
The last event for one of the last 10 days of occurrence
0x04
The most serious event of one of the last 10 days of occurrence
0x05
One of the 5 most serious events over the last 365 days
0x06
The first event or fault having occurred after the last calibration
0x07
An active/on-going event or fault
0x80
Manufacturer specific
Table 4: Purpose codes for an event
