•
•
•
•
•
•
The warranty period is calculated from the date of purchase by the end user and covers
cost for replacement parts / equipment and warranty labor per-formed. A copy of the
original purchase receipt or gift receipt from the original retailer must also accompany
the war-ranty claim. To locate the nearest authorized Autlead service center, please
visit our website at www.autlead.com.
Autlead's obligation under this warranty shall strictly be limited, at Autlead's option,
either to replace or repair, through Autlead direct or through an Authorized Autlead
Service Dealer without charge during the warranty period any part, which in the opinion
of the manufacturer, shows defect in workmanship or material. Service will be sched-
uled according to the normal work flow and business hours at the service center, and
availability of replacement parts. All decisions of Autlead with regard to this limited
warranty shall be final.
This warranty does not cover:
•
•
1. Spray Gun
2. Pressure Hose
3. Fuel Tank
4. Engine Switch
5. Chemical Injector
6. Pump Outlet
7. Thermal Relieve Valve
8. Nozzles
If the symptom you are experiencing is not listed above, or if the provided solutions do
not solve your issue,please visit our extensive online troubleshooting database at:
www.autlead.com
High Pressure Washers
Limited 24 month warranty
Cold water gasoline pressure washers
This Autlead product is warranted by Autlead to be free of defects in workmanship and
materials under normal use.
Specific warranty applies to:
Spray Wand
Leaks
Pump Is Noisy
Water Leaks
From Pump
(Up To 10 Drop
Per Minute Is
Permissible)
Oil Drip
Broken o-ring or
plastic insert.
Not enough gas or
engine oil.
Loose fittings.
Water seals are
damaged or worn.
Thermal protection
device is activated.
Oil seals are
damaged or worn.
Visit www.autlead.com or locate a
service center at www.autlead.com
Visit www.autlead.com or locate a
service center at www.autlead.com
Thermal protection device will auto reset.
Do not run pump for more than 5 minutes
without spraying.
Spray wand not
properly attached.
Turn the swivel nut of the gun clockwise
until connection is tight.
Visit www.autlead.com or locate a
service center at www.autlead.com.
Check that hoses and fittings are air
tight. Turn off machine and purge pump
by squeezing trigger gun until a steady
flow of water emerges through the
nozzle.
Check fittings.
Symptom
Cause
Solution
16
English
