AUTHOR Alarm OBD Block, Руководство по эксплуатации

Страница: 4 / 8

4
Operation description
OBD BLOCK is comprised of a key (hereafer “adapter”)
and a two channel digital relay.
When the adapter is connected to the standard OBD-II
outlet, the system checks compliance of a digital key
and a digital relay. When the correct key is detected,
the relay closes and the OBD-II outlet connection link
recovers.
Installation
To connect a digital relay, connect its wires the
following way:
A. Red. To DC+ (16 pin).
B. Black.
To earth/ground (4
pin with an interruption from
the harness side).
C. Yellow/orange. Digital bus
to 4 pin OBD-II (4 pin with an
interruption from the side of
the OBD-II outlet).
D. White, brown. Interruption
of the CAN bus (6, 14 pin
with an interruption from the
harness side).
E. White, brown.
Interruption of the CAN
bus (6, 14 pin with an
interruption from the
side of the OBD-II outlet).