AuthenTrend ATKey.BLE, Быстрое руководство

Страница: 13 / 17

13
•
Design concept of “Dynamic Lock”
o
Windows API - if there is NO operations for 30 sec., ATKey app is aware from Windows
API, then we are checking the RSSI value of the companioned ATKey for 10 sec., if RSSI
value is lower than -70, then lock the PC to Logon screen
o
Wizard is done, you can see the Registered ATKey listing as below
• Buttons of the ATKey:
o
“LED”: click it, BLUE LED of the ATKey will enable, and flashing for 5 sec. - this is helpful to identify
the registered ATKeys if you have a lot of ATKeys there.
o
Fingerprint(s): add (up to 3), delete (delete all), Calibration (re-calibrate fingerprint sensor if you
found FRR getting worse or slow response)
o
“Configure”:
§
Key information
§
BLE information
§ Rename
§
Dynamic Lock
o
“Remove”: Remove this ATKey from this PC (not paired, not companion)