KINGSLEY–BATE
Fine Garden Furniture
0
ASSEMBLY INSTRUCTIONS FOR THE AM-25
BACK
SEAT
1
*NOTE:
8
A TENON
9
B MORTISE HOLE
1 0
RIGHT END FRAME LEFT END FRAME
2
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match all joints with the corresponding letters
or numbers stamped on the component parts.
3
STEP-II
Find the END FRAME with num bers stamped next to the m ortise holes
and carefully lay it down. Matching t he numbers, gently slide the BACK
STRETCHER, BOTTOM LEG STRETCHER and the SEAT into place. If
necessary, gently rock the parts while pushing the tenons into the m ortise
holes until all the joints fit snugly together.
4
STEP-III
Carefully fit the rem aining END FRAME o ver the SEAT, BACK
STRETCHER and BOTTOM LEG STRETCHER tenons. You can
carefully use a rubber mallet to drive all the joints together.
5
STEP-IV
Using a hammer, drive the dowels into the END
FRAMES to secure the SEAT and BOTTOM LEG
STRETCHER. We suggest t hat you use a block of
wood between the hammer and the dowel heads for t he
last few blows. This will reduce the chan ces of marring
the wood.
