Autel MaxiPro MP808, Руководство пользователя, Страница: 42 / 111

36
2. Tap the Selected navigation button.
3. Select a parameter item on the left column or enter the item name
in the Search bar.
4. Tap on the right side of the MIN button and enter the required
minimum value.
5. Tap on the right side of the
MAX
button and enter the required
maximum value.
6. Tap the ON/OFF button on the right side of the Buzzer Alarm
button to turn it on or off.
7. Tap Done to save the setting and return to the Live Data screen; or
tap Cancel to exit without saving.
If the threshold limits are successfully set, two horizontal lines will display on
each of the data graphs (when Waveform Graph Mode is applied) to
indicate the alarm point. The threshold lines are displayed in different colors
from the waveform of the parameters.

Record Button – displays the configuration screen for Record Setting,
to set the trigger type, duration and trigger point for the data recording
function.
a) Trigger Type – sets the trigger mode for data recording, Manual
and Auto. There are four options available:
1) Manual – manually start and stop data recording.
2) DTC – auto triggers data recording when any DTC is detected.
3) DTC Check Mode – auto triggers data recording when certain
pre-selected DTC types are detected.
4) Parameter – auto triggers data recording when any parameter
value reaches the preset threshold.
b) Duration – sets the recording time (for Auto trigger mode only).
c) Trigger Point – reserves a relative percentage of a record length
before the data recording start point for reference (for Auto trigger
mode only).
 To perform setting for live data record
1. Tap the Setting functional button at the bottom of the Live Data
screen.
2. Tap the Record navigation button.