52
8)
Press the
ESC
button to return to the
previous menus.
6.8 Component Test
The Component Test function allows initiating a leak test for the
vehicle's EVAP system. The scan tool itself does not perform the
leak test, but commands the vehicle's on-board computer to start
the test. Different vehicle manufacturers might have different
criteria and methods for stopping the test once it has been started.
Before starting the Component Test, refer to the vehicle service
manual for instructions to stop the test.
1)
Use the
UP
/
DOWN
scroll button to select
Component Test
from
Diagnostic Menu
and press the
OK
button. (Figure 6.3)
2)
Wait for the scan tool to display the
Component Test
menu.
Figure 6.33
3)
If the test has been initiated by the vehicle, a confirmation
message will be displayed on the screen.
Figure 6.34
Component Test
1.EVAP Sys. Leak Test
Component Test
Command Sent!
Press any key to continue
