Autel MaxiCheck MX808 Скачать руководство пользователя страница 95

Страница: 95 / 140

NOTE

To print, the

ablet

must be connected, either via WiFi or through a

cabled network connection

to the

same network

the computer

, with

the installed MaxiSYS Printer application,

connected to a printer.



To perform printing via PC

Run the

MaxiSys Printer

on the computer.

Click

Test Print

to make sure the printer is working successfully.

Tap the

Print

button on the toolbar of the

ablet.

A temporary

document will be created and sent to the computer.



If the

Auto Print

option in the MaxiSys Printer is selected, the

MaxiSys Printer will print the received document automatically.



If the

Auto Print

option is not selected, click

the

Open PDF

File

button to view all the temporary files. Select the file(s) you

want

print

and click Print.



To perform printing via APP

The tablet does have the ability to print via APP to a

Wi-Fi

enabled

printer

. Download and install the Android APP compatible with your

printer.

To print a saved document, tap the

Print

button of a

saved file

on the

ablet

Figure 8-3

Sample Printing Setting Screen

Содержание MaxiCheck MX808













































































































































Результаты поиска

Содержание MaxiCheck MX808

Отзывы:

Autel MaxiCheck MX808, Руководство пользователя, Страница: 95 / 140

Результаты поиска

Содержание MaxiCheck MX808

Отзывы: