24
29)
Follow onscreen instructions to finish the tenth phase.
- Hold bleeder hose tight.
30)
Press
Y
button to continue.
31)
Follow onscreen instructions to finish the eleventh phase.
- Close bleeder screw at front right brake caliper.
- All bleeder screws are closed.
- Brake system venting has been completed.
- Set filling and bleeding unit pressureless.
- Leave filling and bleeding unit connected.
32)
Press
Y
button to continue and wait until the
“
Operation Done!
”
message shows:
l
If the operation is not carried out successfully, an
“
Operation Failed!
”
message shows. Repeat the process to
try again.
33)
Press any key or wait a few seconds to return.
F. Inspect Brake Air
If brake system fails, only the front wheels are braked via a
separate hydraulic circuit without brake servo assistance. The
Inspect Brake Air is to ensure that no air is present in the
separate hydraulic circuit.
Important: DO NOT operate the pedal until you are prompted to
do; otherwise the service may not be completed.
1)
Use
UP/DOWN
button to select
Inspect Brake Air
from
Select
Function
menu and press
Y
button to confirm.
........
Change Fluid
.... .
Operation Done!
Press any key to con.
