16
a. Place the GPS&IMU module horizontally, and note that the X-axis direction is
consistent with the vehicle's forward direction.
b. The module can be fixed using screws or double-sided tape.
c. Connect the two wire harnesses at the end of the GPS&IMU module to the radar and
display respectively.
Note: GPS&IMU module installation angle tolerance<30°
2.6 Diaplay Screen Installation
a. Remove the A-pillar cover and drill holes: Referring to Figure 1, take the mounting
holes on the bracket back plate as reference points, and drill two 4.5 mm mounting
holes and one 12 mm hole to route the cable through (30-40 mm below the mounting
holes).
b. Referring to Figure 2, use two M4*14 screws to fix the bracket back plate to the A-
