Autel Robotics EVO Nano Series, Быстрый старт

Страница: 10 / 16

Propeller
Schematic
diagram
Matching
machine arm
7
8. Install the propeller
The propeller has been installed on the aircraft by default. If you need
to re-install it, please refer to the following instructions. Note that the
propeller must be intact and firmly installed on the aircraft, and the
propeller marked with a dot must be correctly matched to the arm.
· Install the propeller
（ 1 ） Confirm that the aircraft is turned off.
（ 2 ） Choose the propeller that matches the arm.
（ 3 ） Align the hole of the propeller with the screw hole of the
motor, and lock the screw.
• Disassemble the propeller
（ 1 ） Turn off the aircraft.
（ 2 ） Loosen the screw to remove the propeller.
Without dots mark
Mounted on the
arm without dots
With dots mark
Mounted on the
arm with dots