8
GPRS Monitoring Gateway
3.
Setting up the SIM card
3.1
Unlock the security code on your SIM card
NOTE! The GPRS Monitoring Gatway should be fitted with a micro size SIM card. Make sure the
SIM card has been cut to the right size or equipped with a suitable adapter before proceeding
installation.
If the SIM card has a PIN code, you must unlock it by using a mobile phone. Insert the SIM card into the phone
instead of your regular SIM card.
Android:
-
Go to ‘Settings’
-
‘Security’
-
‘Set up SIM card lock’
-
Uncheck the box next to ‘Lock SIM card’
-
Confirm the change by inputting the current PIN code
-
<OK>
iPhone:
WARNING! Most iPhones use a SIM card in the so-called nano-size. If you would like to use an
iPhone for this procedure, you will have to make sure the SIM card is resized to fit in the
iPhone. By doing so, a convertor is necessary to fit the SIM card in the GPRS Monitoring Gatway
afterwards.
-
Go to ‘Settings’
-
‘Phone’
-
‘SIM PIN’
-
Uncheck the box next to ‘SIM PIN’
-
Confirm the change by inputting the current PIN code
-
<OK>
3.2
Install the SIM card
The SIM card can now be installed in the GPRS Monitoring Gateway.
3.3
Configure the SIM card
To activate the data communication, a SMS has to be sent from a mobile phone to the SIM card in the GPRS
Monitoring Gateway. The exact text of this message depends on the providers conditions.
