Bringing people together
Functioning
calling and conversation
When a call is received from the entrance panel, the monitor starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period the image appears on the screen, the user can open directly, pressing the button
or establish
a conversation pressing the button
The conversation has a maximum of 90 seconds. If you want to continue with
the conversation, press the button
keypad activation at standby
IN STANDBY, to prevent unwanted presses, the monitor incorporates a security system in which the touch keyboard
remains locked until the push button
is pressed.
EN
self-starting
By pressings the button
the user can establish communication with the PANEL / CCTV CAMERA that he wishes in
the case of more than one is present in the installation.
With each press
the system will automatically switch to the next device, showing the image and allowing the
opening of it by pressing the button
calling to concierge
If the monitor is in standby, by pressing the button
, a call will be made to the concierge unit. If the system does
not have a concierge unit installed, the monitor will emit an error beep.
ding dong function
The monitor allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. These calls will be differentiated with different melodies and flashes automatically. In order to have
this function, you only have to connect the button of the house bell to the monitor.
cctv surveillance function
The monitor allows the control of panels and CCTV cameras automatically. First we press the button
Each press
on the button will activate a different device. To do this, each CCTV camera must be installed with an Auta digital
interface.
external functions
The monitor has 1 push-button
that allow auxiliary functions, such as garage doors, lights, irrigation, etc ...
To do this, an Auta auxiliary relay must be connected to the control circuit we want to control.
privacy function
The monitor incorporates a privacy mode in which the ringing tones are muted for a selected time. If the privacy mode
is active, the monitor shows by flashes the selected period of time (1 flash -
2 hours
, 2 flashes -
4 hours
, 3 flashes -
6 hours,
4 flashes -
8 hours
). After the selected period of time finished, the monitor automatically returns to standard
mode. To activate the privacy mode press the button
for 4 seconds (
start to blink), select the desired period
of time by pressing the button
. Each press will activate a different period of time between the 3 available ones.
Validate the selection by pressing the button
function door sensor
If a door contact is installed, the monitor allows monitoring, in real time, the entrance to the building. If the door remains
open for a longer period of time than stipulated in the settings, the system sends a visual alarm to all the monitors of
the installation that remains active until the door is closed correctly.
melody selection and adjust of the calling volume
If the monitor is in standby, press
With each press will select a different melody and a different calling volume.
There is 4 call melodies and 2 volume levels for each one (MEDIUM and HIGH)
