Bringing people together
Functioning
calling and conversation
When a call is received from the entrance panel, the monitor starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period the image appears on the screen, the user can open directly, pressing the button
or establish
a conversation pressing the button
The conversation has a maximum of 90 seconds. If you want to continue with
the conversation, press
2 times
the button
and then
self-starting
By pressings
2 times
the button
and then
the user can establish communication with the PANEL / CCTV
CAMERA that he wishes in the case of more than one is present in the installation.
With each press
the system will automatically switch to the next device, showing the image and allowing the
opening of it by pressing the button
calling to concierge
If the monitor is in standby, by pressing
2 times
the button
and then
, a call will be made to the concierge unit.
If the system does not have a concierge unit installed, the monitor will show the message "
concierge not available
" .
ding dong function
The monitor allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. These calls will be differentiated with different melodies and flashes automatically. In order to have
this function, you only have to connect the button of the house bell to the monitor.
cctv surveillance function
The monitor allows the control of panels and CCTV cameras automatically. First we press
2 times
the button
and
then
Each press activates a different device. To do this, each CCTV camera must be installed with an Auta digital
interface.
external functions
The monitor has 2 independent push-buttons
that allow auxiliary functions, such as garage doors, lights,
irrigation, etc ...
To do this, an Auta auxiliary relay must be connected to the control circuit we want to control.
EN
