Darling
6
english
Figure 5: Close the Primary Air
As soon as the wood logs are burning well, you
can regulate the heating capacity with the
secondary air slider. (Slider set to the maximum
(“AUF”) setting produces maximum heat – see
Figure 2.)
When adding wood to the fire, follow the same
procedure as when igniting the fire: Open primary
air, open secondary air, carefully open firebox
door, lay wood on the fire, close the firebox door.
Wait until the added wood catches fire and is
burning. Then close the primary air. Subsequently
regulate the fire with the secondary air supply.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Nr. drawing Part number
Flat gasket 8 x 2 x 1440 mm
22
710096
Round gasket d=12 x 1560 mm
20
710338
Keramott
Description
Nr. drawing Part number
Darling Keramott rear
8
716080
Darling Keramott lateral left
6
716081
Darling Keramott lateral right
7
716082
Darling baffle plate cast large
3
716194
Darling baffle plate vermiculite large
4
716175
Darling baffle plate vermiculite small
5
716253
Darling bottom grate
1
716025
Darling riddling grat
2
716122
Darling wood retainer
9
716075
Other parts
Description
Nr. drawing Part number
Darling door glass
21
716062
Stove lacquer
--
650002
Wood/coal igniter
--
640067
Glass cleaner ½ litre
--
640070
Keramott numbering = installation instructions!
Accessories
You can obtain floor plates of glass or steel, fireplace utensils and care products from your certified
dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
