OC707 True Condenser Vocal Microphone
Owner’s Manual
Introduction and Safety Instructions
Please read, understand, and follow all instructions in this manual
before using this product.
This product was made for professional users and we ask you to follow
a few restrictions to guarantee a hassle-free workflow for you, and to
keep the product in perfect working condition:
•
Please do not operate this product in other than the intended
use cases.
•
Do not use if the product is defective
•
Always keep and operate the product in a dry and safe place
•
Do not expose it to excessive heat (for example, do not leave it
in your car parked in the sun)
•
If you need to bring the product inside from the cold, please
give it time to reach adequate temperature before use
(allowed storage temperature range: -25 °C to 60 °C).
•
It’s not recommended to operate the microphone outside the
specified working temperature range: 0 °C to 55 °C.
•
Do not use this product in a wet or in humid environment.
•
Do not drop.
•
When used upside down (for example in the OCH1) make sure
that a tight fit is achieved and do not operate it upside down
right above personnel.
•
This product requires a phantom power source of 48 V
(+/-4 V), max draw is 2,4 mA.
•
Please keep this product away from small children and
persons who are not able to operate professional audio
equipment (like light technicians and drunken roadies).
•
If you need to clean the product, do this only with a soft dry
cloth
•
Please do not use any third-party accessories unless otherwise stated
•
Do not disassemble the product, as there are no user-serviceable parts inside (but plenty of
components to mess up).
•
The length of the XLR cable must not exceed 30 m.
•
Do not remove the stickers (if applicable).
Thank you for reading the instructions so far and thank you for putting your trust in Austrian Audio.
