AS1115 - Demo Board Manual
White Goods
www.austriamicrosystems.com
Revision 1.04
5 - 7
Operational sequence
1.
If not present get the datasheet for the AS1115 from
www.austriamicrosystems.com
.
Use the IC on the
demoboard only with the recommended settings and values as described in the datasheet.
2.
First connect the Power Supply (+2.7V to +5.5V) to the demoboard (VDD “A” and GND “B”) and than
power up the controller (I/O Interface “D”). To power down the system disconnect first the controller and
than the Power Supply of the demoboard.
3.
For the data format of the I²C interface please see the datasheet of the AS1115.
Have fun using the demoboard. If there are questions do not hesitate to contact us. See contact information at
the end of the application note.