QUICK START GUIDE
This quick start guide provides a brief overview of the key features of the ZONEMIX system.
A full manual can be downloaded from:
www.australianmonitor.com.au/collections/zonemix-system
FRONT PANEL
SIGNAL PRESENCE LEDS
Green LED = Signal present
Flashing Green = Muted (Outputs only)
Red = Clipping (Reduce input level).
SD CARD CONNECTOR
Used to store messages, tones and paging
announcements. Accepts full size SD card,
maximum density 2TB, FAT32 file system
required.
OUTPUT ZONE KNOB
Rotate left and right to select the output zone.
Push and hold for 2 seconds to enter Audio
Setup mode.
MIX KNOB
Rotate left and right to select the input channel
mix desired for the output zone.
Push and hold for 2 seconds to enter System
Setup mode.
LCD CHARACTER DISPLAY
20 x 2 Blue LCD character display
SCAN TO DOWNLOAD FULL MANUAL
www.australianmonitor.com.au
9
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
9
10
8
10
PRESETS KNOB
Rotate left and right to cycle through the
available presets and push to select.
Push and hold for 2 seconds to save to a
preset.
VOLUME KNOB
Rotate left and right to adjust the volume level
of the currently selected input or output.
Push the knob to mute or unmute.
USB-C CONFIG PORT
Connect to a PC using a USB-C cable to
control the ZONEMIX via the PC Control
Software
STATUS LED
This blue LED will illuminate indicating that the
ZONEMIX is on and receiving mains power.
POWER SWITCH
Press the switch up to power on and down to
power off.
