2
Mounting the lock catches
The lock catches mount to the underside of the top piece. The mount with the
flat side facing the outside of the rack as per the diagram.
With the accesories there is a small bag of screws that contains 4 x M5x10 self
tapping screws and 4 x M4x8 self tapping screws. The 4 x M5x10 screws are
used to mount the lock catches.
3
Removing the inner fan tray/corner covers
A:
The top piece will need the inner tray removed in order to mount it to the
side frame. On the coners of the top piece there are four 4 x M6x12 silver hex
bolts that will need to be removed
B:
Once the inner fan try has been removed the plastic corners need to be
removed. This can be done by removing the 4 x M4x8 gold screws used to
hold them in.
A
B
PAGE 5
INTEGRATOR RACKS INSTALLATION AND OPERATION MANUAL
PREPARING THE TOP PIECE
