I N T R O D U C T I O N A N D C O N T E N T S
D P R M I N S TA L L AT I O N & O P E R AT I O N M A N UA L
PAG E 3
The Australian Monitor Installation Series DPRM Remote Control Panel
is a control surface that is designed to be used with the DigiPage Zone
Paging and Source Selection System.
The DPRM allows control over program source selection, local input
selection and volume control from a remote location.
LED illumination provides the user with visual feed back if the
system is busy.
Connection to the DigiPage is via low cost CAT 5 cable and as with all
Australian Monitor Installation products, the Remote Control Panel
provides an elegant solution at a contractor friendly price.
I N T R O D U C T I O N
3
C O N T R O L S
4
I N S TA L L AT I O N
5
P R O G R A M M I N G
6
This symbol is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence
of important operation and maintenance (servicing)
instructions in the literature accompanying the appliance.
To prevent electric shock do not use this (polarised) plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
Caution:
AUS, EUR, USA
Copyright 31st May 2003
Rev A: 31st May 2003
Rev B: 11th Aug 2004
