PAGE 4
AUDIO CONTRACTOR TOOLS INSTALLATION AND OPERATION MANUAL
1
BALANCED XLR INPUT CONNECTOR
2
BALANCED XLR THRU OUTPUT CONNECTOR
Parallel to input
3
BALANCED XLR OUTPUT CONNECTOR
Transformer isolated
4
GROUND LIFT SWITCH
Pin1 lift on transformer isolated XLR output Set to “GND” to connect
pin 1 of output XLR connector to pin 1 of input XLR connectors.
Set to “Lift” to disconnect pin1 output XLR connector
LINE SPLITTER
The LETS SPLIT (L) is a balanced line level splitter with a balanced XLR line level input which provides both a transformer balanced XLR output & a thru (direct) XLR
output of the input signal. The LETS SPLIT (L) also provides a ground lift switch to eliminate ground loop hum.
LINE SPLITTER
The LETS SPLIT (M) is a balanced microphone level splitter with a balanced XLR microphone level input which provides both a transformer balanced XLR output & a thru
(direct) XLR output of the input signal. The LETS SPLIT (M) also provides a ground lift switch to eliminate ground loop hum.
1
BALANCED XLR INPUT CONNECTOR
2
BALANCED XLR THRU OUTPUT CONNECTOR
Parallel to input
3
BALANCED XLR OUTPUT CONNECTOR
Transformer isolated
4
GROUND LIFT SWITCH
Pin1 lift on transformer isolated XLR output Set to “GND” to connect
pin 1 of output XLR connector to pin 1 of input XLR connectors.
Set to “Lift” to disconnect pin1 output XLR connector
1
1
2
2
3
3
4
4
LET’S SPLIT (L) & LET’S SPLIT (M)
REAR PANEL
FRONT PANEL
REAR PANEL
FRONT PANEL
