Power Input
24 VDC (regulated); 12VA max.
Output Mic/Line Switch
28dB
Noise
-89dB
Frequency Response
(0dB/-3dB) 10Hz - 50kHz
Total Harmonic Distortion
Line In (XLR/RCA) 0.02%; Mic In (XLR) 0.1%
Crosstalk
Better than 80dB
Phantom Power
24VDC
Input Sensitivity
Line (XLR) 775mV (0dB); Mic (XLR) 10mV (-37dB);
Line (RCA) 775mV (0dB)
Dimensions
Dimensions: 44.0 x 482.0 x 168.0 (H x W x D) mm
Weight
Net 2.5 kg (5.5 lb), Shipping 3.0 kg (6.6 lb)
• All measurements done with levels set In/Out at 0dB;
• All measurements referenced to 0dBu (0.775mV)
Engineered and Distributed By AUDIO TELEX COMMUNICATIONS PTY LTD (
ABN 78 001 345 482
), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia
NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698 VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977 QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237 WA Tel: (08) 9228 4222 Fax: (08) 9228 4233
SA Tel: (08) 8352 4444 Fax: (08) 8352 4488 NZ Tel: (09) 415 9426 Fax: (09) 415 9864 Export Enquiries: [email protected]
Website: www.australianmonitor.com.au
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
The distribution amplifier shall be a high quality two input, six output distribution
1RU device. The unit will have two inputs which can be balanced or unbalanced
and each input’s sensitivity can be switched between Mic and Line level via dip
switches. Additionally these front panel dip switches will allow any of the inputs to be
routed to any of the six outputs. The units shall provide a four segment LED level
meter per input.
The unit shall provide 24 VDC Phantom power which is to be individually switchable
per input.
The units outputs shall be balanced or unbalanced and feature up to -60dB of atten-
uation so that they can be run as any combination of line level or mic level outputs.
The distribution amplifier shall be an Australian Monitor Installation Series AMIS26.
