7
19.
Fuse Holder.
The AMIS23X has a 500mA mains voltage fuse.
Modes of Operation
2 Way Stereo
When using the AMIS23X in 2 way stereo mode, firstly ensure the Stereo/Mono
Mode switch (7) is set to the correct position (switch “out”), then simply patch
the left line level output signal into input 1 (16 or 17) & the right line level
output signal into input 2 (8 or 9). Connect low output 1 (13 or 14) & low
output 2 (4 or 5) to your low frequency amplifiers. Connect the Channel 1
high output (10 or 11) & the channel 2 high output (1 or 2) to your high
frequency amplifiers.
3 Way Mono
When using the AMIS23X in 3 way mono mode, firstly ensure the Stereo/Mono
Mode switch (7) is set to the correct position (switch “in”), then simply patch
the line level output signal into input 1 (16 or 17). Connect low output 1 (13 or
14) to your Low frequency amplifiers, connect low output 2 (4 or 5) to your
mid frequency amplifiers & connect high output 2 to your high frequency
amplifiers. In this mode ensure Channel 1 Range Selection Switch (7) is set to
X1 & Channel 2 Range Selection Switch (7) is set to X10,& that both Channel
2 High Level (10) & Channel 2 Input Level (4) are set to ‘0’.
AMIS23X Specifications
1. Frequency Range;
x1: 80Hz – 920 Hz
x10: 800Hz – 9.2 kHz
2. Frequency Response;
20 Hz – 20 kHz
3.
S/N
Ratio;
Low Frequency Output @ 0dB <-106dBu
High
Frequency
Output
@
0dB
<-97dBu
Содержание AMIS23X
Страница 8: ...8 ...
