AUSTRALIAN MONITOR AMD100 Скачать руководство пользователя страница 2

Read these instructions.

1. 

Keep these instructions.

2. 

Heed all warnings.

3. 

Follow all instructions.

4. 

Do not use this apparatus near water.

5. 

Clean only with dry cloth.

6. 

Do not block any ventilation openings. Install in accordance with the 

7. 

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, 

8. 

stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. 

9. 

A polarized plug has two blades with one wider than the other. 
A grounding type plug has two blades and a third grounding prong. 
The wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly 

10. 

at plugs, convenience receptacles, and the point where they exit from 
the apparatus.

Only use attachments/accessories specified by the manufacturer.

11. 

Use only with the cart, stand, tripod, bracket, or table specified by the 

12. 

manufacturer, or sold with the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when 

13. 

unused for long periods of time.

Refer all servicing to qualified service personnel. 

14. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

This appliance shall not be exposed to dripping or splashing water and 

15. 

that no object fi lled with liquid such as vases shall be placed on the 
apparatus.

Plug this apparatus to the proper wall outlet and make the plug to be 

16. 

disconnected readily operable.

Main plug is used as disconnected device and it should remain readily 

17. 

operable during intended use. In order to disconnect the apparatus from 
the mains completely, the mains plug should be disconnected from the 
mains socket outlet completely.

WARNING:

18. 

 To reduce the risk of fi re or electric shock, do not expose this 

apparatus to rain or moisture.

An appliance with a protective earth terminal should be connected to a 

19. 

mains outlet with a protective earth connection.

LISEZ ces instructions.

1. 

Tenez ces instructions.

2. 

Notez tous les avertissements.

3. 

Suivez toutes les avertissements.

4. 

N’utilisez pas ce produit près de l’eau (la piscine, la plage, le lac, etc.).

5. 

Nettoyez seulement avec une étoffe sèche.

6. 

Ne bloquez aucuns troux de ventilation. Installez en accord avec 

7. 

les instructions du manufacturier.

N’installez près aucunes sources de chaleur comme radiateurs, registres 

8. 

de chaleur, fours ou les autres équipements (y compris amplifi cateurs) 
qui produisent la chaleur.

Ne défaites pas le but de sécurité de la fi che polarisée ou base-type. 

9. 

Une fi che polarisée a deux tranchants avec un plus large que l’autre. 
Une fi che de base type a deux a deux tranchants et une troisième 
pointe de base, le tranchant large ou la troisième pointe est fourni 
pour votre sécurité. Si la fi che donnée ne conforme pas votre prise 
de contact, consultez un électricien pour remplacement de la prise 
de contact obsolète.

Protegez le cordon de secteur contre être marchée dessus ou pincez 

10. 

en particulier aux fi ches, aux douilles de convenance, et au point où ils 
sortent de l’appareil.

Seulement utilisez attachements/accessoires spécifi és par le 

11. 

manufacturier.

Utilisez seulement avec un chariot, un stand, un trépied, un support 

12. 

ou une table indiquée par le manufacturier, ou vendue avec l’appareil. 
Quand un chariot est utilisé, faites attention en déplaçant la combinaison 
d’appareil/chariot pour éviter de se déséquilibrer.

Arrachez la fi che du dispositif durant éclair et orage ou 

13. 

quand pas utilisé pour longues périodes de temps.

Référez au personnel qualifi é de service pour toutes 

14. 

réparations. La réparation est donnée quand le système 
a été endommagé à n’importe façon, par exemple un fi l ou une fi che 
endommagé(e) de la source d’alimentation. Avoir été exposé à pluie ou 
humidité, n’opère pas normalement, ou avoir été tombé.

L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures 

15. 

et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé 
sur l’objet.

Branchez l’appareil à une source appropriée et faire que la prise à 

16. 

débrancher soit facilement accessible.

La prise du secteur ne doit pas être obstruée ou doit être facilement 

17. 

accessible pendant son utilisation. Pour être complètement déconnecté 
de l’alimentation d’entrée, la prise doit être débranchée du secteur.

AVERTISSEMENT: 

18. 

Pour éviter le risque d’incendie ou de chocs électriques, 

ne pas exposer cet appareil à la pluie ou à l’humidité.

Un appareil avec la borne de terre de protection doit être connecté au 

19. 

secteur avec la connexiion de terre de protection.

IMPORTANT SAFETY INFORMATION

PRÉCAUTIONS DURANT UTILISATION

PAGE 2

AMD100/200 INSTALLATION AND OPERATION MANUAL

Содержание AMD100





















Отзывы: